批量生产是指在一定时间内同一批生产的机器数量，结构和制造方法完全相同。 批量生产与定制生产之间的最大区别之一是，由于内部零件的差异，在客户使用过程中零件损坏后可能必须制造定制机器。 周期长，这将大大延迟生产过程。 批量生产零件的一致性解决了用户零件在使用过程中可以立即更换的问题，不仅降低了生产成本，而且节省了生产时间。 天豪的大规模生产有严格的维护体系，制造过程带来了制造的好处，从而节省了成本并提高了生产质量； 检查过程是预先预测机器问题，及时进行维护和改装，并确保客户的日常运行。 。
Mass production refers to the number of machines produced in the same batch within a certain period of time, with the same structure and manufacturing method. One of the biggest differences between mass production and customized production is that due to the differences in internal parts, customized machines may have to be manufactured after parts are damaged during customer use. Long cycle, which will greatly delay the production process. The consistency of mass production parts solves the problem that user parts can be replaced immediately in the use process, which not only reduces the production cost, but also saves the production time. Tianhao's large-scale production has a strict maintenance system, and the manufacturing process brings manufacturing benefits, thus saving costs and improving production quality; the inspection process is to predict machine problems in advance, timely maintain and modify, and ensure the daily operation of customers.
机器完成后，我们将在机器上进行初步测试，以查看硬件的基本功能是否正确，是否有卡纸或声音是否异常等，然后使用软件进行调试 机器功能是否符合出厂标准。 此外，检查人员还将检查各种指示器，以确保正常使用并点亮； 检查继电器和电磁阀等电气部件，以确保其正常运行； 密封配电箱等必要的地方，以防止客户随意拆装，造成机器故障； 每台机器的水平测试和负载能力测试。
After the completion of the machine, we will conduct preliminary tests on the machine to see whether the basic functions of the hardware are correct, whether there is paper jam or abnormal sound, etc., and then use the software to debug whether the machine functions meet the factory standards. In addition, the inspectors will also check various indicators to ensure normal use and lighting; check electrical components such as relays and solenoid valves to ensure their normal operation; seal the distribution box and other necessary places to prevent customers from disassembling at will, causing machine failure; level test and load capacity test of each machine.
完成后，质量管理人员将进行工厂老化测试，以确保机器的长期稳定性，因为某些机器在测试过程中不易出现问题，并且会在48小时甚至72小时后被发现 小时的老化测试操作。 机器运行24小时后，在自动操作过程中检查位置是否有偏差或是否有异常噪音，并让机器在同一位置行走三天三夜，以检查是否存在 确保稳定性的任何问题。 这项工作还旨在找出机器中可能出现的早期问题，为客户提供稳定的性能，并使客户放心使用我们的产品，从而大大降低维修率。
After completion, the quality management personnel will carry out factory aging test to ensure the long-term stability of the machine, because some machines are not prone to problems during the test process, and will be found to be aging test operation for hours after 48 hours or even 72 hours. After 24 hours of operation, check whether there is deviation or abnormal noise in the position during automatic operation, and let the machine walk in the same position for three days and three nights to check whether there is any problem to ensure stability. This work also aims to find out the possible early problems in the machine, provide customers with stable performance, and make customers feel at ease to use our products, thus greatly reducing the maintenance rate.