1, curing speed is too fast or too slow
2, two-component glue mixing is not uniform, white silk, fish maw
Rubber mixer, mixer one-way valve leakage, replace one-way valve.
The glue mixer, mixer and gun passages are blocked, and the mixer and pipe are cleaned.
There is dirt in proportion pump and cleaning proportion pump.
The air pressure of the air compressor is not enough, the air volume is unstable, and the pressure is adjusted.
3, glue machine, pressure plate gel
The sealing ring of pressure plate is damaged, deformed, aged and hard to be replaced, and new rubber ring is replaced.
The lifting pressure is too great.
The barrel is too big, not appropriate, customers in the procurement, the first volume of your gum machine platen size, now on the market of machine platen three specifications, 560mm, 565mm, 571mm, warm Wanjia science and technology development limited company can according to customer's machine platen size, provide the corresponding packaging barrels packaging.
4, the installation of insulating glass, cold and heat exchange fog
The two-component silicone rubber is mainly two sealing, bonding structure, so the seal must be sealed with butyl sealant, inserted at the corner completely sealed with butyl rubber.
In the season of high temperature and high humidity, must use the better quality of the molecular sieve can be completely sealed after the remaining moisture glass suction clean, with all. The whole operation shouldn't take long.
5, rubber disc pressure can not go down
The barrel deformation, not round, available hammer bungholes copy circle, press down.
The barrel is too small, or the pressure plate sealing ring is too large, you can smear a little glue on the sealing ring, can play the role of lubrication pressure.
6, bubble problem (A group has bubbles or bubbles after mixing)
Pressure glue can not completely exhaust the air, so every time you change glue, you must open the exhaust valve, and then close the air after the completion of the switch.
Mixing air in manual mixing process.
The exciting content of this article comes from the two component dispenser, please click on our official website: /, thank you for coming!